Pump assembly L1618

Pump Type - piston

Rated pressure - 1650 psi (113 bar)

Continuous duty capacity -  57.6 GPM, 1100 RPM.

intermittent duty capacity -  76 GPM, 1450 RPM.

Gallons per revolution - 0.0524

Seal diametr - 2.25 in

Number of Cylinders - 3

Stroke Length - 3.5 in

Weight - 705 lbs

Length - 38.5 in

Width - 18 in

Height - 15.5 in

Mechanical Efficicency - 85%

Ductile Iron - yes

Aluminum Bronze - yes

Stainless Steel - no

HP Carbon Steel - yes

HP Stainless Steel - yes

API Carbon Steel - no

API Stainless Steel - no

Pump Selection Procedure

Determine your HP requirement using the following equation:

HP=GPM*PSI/1714*Mechanical Efficiency

For preliminary sizing, use 85% for the mechanical efficiency, then adjust based on actual efficiency of pump selected.

Determine the speed at which the pump will need to operate to produce the desired flow.

RPM = Desired Flow (GPM) / Displacement

Notes:

1. Ratings are based on nominal speeds and pressures and may vary on FMC written approval.

2. Capacities and speeds indicated are based on 100% volumetric efficiency.

3. Intermittent duty is defined as 0-8 operational hours per day. Any service that falls outside of this range should use continuous duty ratings.

4. Dimensions are approximate and based on standard pump models with cast fluid cylinders. Width is measured parallel to the axis of the drive shaft and does not include the shaft extension.

There are no reviews for this product.