The PP-500 mud pump is designed for pumping drilling mud and water and is used in horizontal directional drilling. The maximum pump capacity is 522 l / min and the maximum pressure is 97 bar. The pump cylinders are made of stainless steel with a ceramic insert, which significantly increases reliability and increases the service interval. The mud pump pistons are made of Kevlar material, which is suitable for aggressive environments. The pump is equipped with disc valves for aggressive applications. The pump cylinder diameter is 3.00 inches (76.2 mm).
Borgpumps company supplies spare parts for the PP-500 mud pump to meet the customer's needs, it is possible to install:
- sleeves of reduced diameter to increase the pump pressure
- sleeves made using the technology of hard chrome plating
- of bimetallic sleeves (service life 600-800 hours under normal conditions)
- pistons made of HSN material (Highly saturated nitrile).
New
PD-038-10009 PP500 Mud Pump Piston
The piston sleeve is made of HNBR (Nitrile Butadiene rubber). The piston assembly consists of:Piston sleeveof the piston HolderLoc..
PD-038-10010 PP500 Mud Pump Piston Seal
The piston sleeve is made of HNBR (Nitrile Butadiene rubber)...
New
BG-PD-038-10013 Mud Pump Inlet Valve for PP500
Pump Model: Prime Drilling PP-500
Valve Type: Intake port
New
BG-PD-038-10012 Mud Pump Outlet Valve for PP500
Pump Model: Prime Drilling PP-500
Valve Type: Graduation
Showing 1 to 12 of 14 (2 Pages)