BORG Pumps GMBH is the official distributor of Hengtan Machinery in the Russian Federation.

The HENGTAN BWF-450/5 single-acting three-piston drilling pump is designed for pumping drilling mud and water, used in core drilling, coal field research, hydrogeology, foundation filling, and water well drilling. The maximum pump capacity is 450 l / min and the maximum pressure is 49 bar. The pump cylinders are made of high-quality steel using hard chrome plating technology, it is possible to install stainless steel cylinders with a ceramic insert, which significantly increases reliability and increases the service interval. The mud pump pistons are made of high-strength rubber. The pump is equipped with ball valves and stainless steel seats. The pump cylinder diameter is 95 mm, it is possible to install cylinders of other diameters to change the pump pressure and fluid supply parameters.


GB/T827/2X4 Rivet
GB/T827/2X4 Rivet..
GB/T855/12 Washer
GB/T855/12 Washer..
GB/T858/42 Washer
GB/T858/42 Washer..
GB/T86/M12x55 Screw
GB/T86/M12x55 Screw..
GB/T879.1/5x15 Pin
GB/T879.1/5x15 Pin..
GB/T881/8X55 Pin
GB/T881/8X55 Pin..
GB/T893.1/40 Bead Flange
GB/T893.1/40 Bead Flange..
GB/T894.1/60 Bead Flange
GB/T894.1/60 Bead Flange..
GB/T898/GM16-M16x40 Stud
GB/T898/GM16-M16x40 Stud..
GB/T898/GM18-M18x40 Stud
GB/T898/GM18-M18x40 Stud..
GB/T898/GM20-M20X175 Bolt
GB/T898/GM20-M20X175 Bolt..
GB/T898/GM20-M20X230 Bolt
GB/T898/GM20-M20X230 Bolt..
Showing 145 to 156 of 175 (15 Pages)

HENGTAN MACHINERY (BW / BWF) model BW-450/5