BORG Pumps GMBH is the official distributor of Hengtan Machinery in the Russian Federation.

The HENGTAN BW-160/10 single-acting three-piston drilling pump is designed for pumping drilling mud and water, and is used for geological and engineering surveys at depths up to 1000 m. The maximum pump capacity is 160 l / min and the maximum pressure is 98 bar. The pump cylinders are made of high-quality steel using hard chrome plating technology, it is possible to install stainless steel cylinders with a ceramic insert, which significantly increases reliability and increases the service interval. The mud pump pistons are made of high-strength rubber. The pump is equipped with ball valves and stainless steel seats. The pump cylinder diameter is 70 mm, it is possible to install cylinders of other diameters to change the pump pressure and fluid supply parameters.


GB / T858 / 56 Washer
GB/T858/56 Washer..
GB / T859 / 10 Washer
GB/T859/10 Washer..
GB / T859 / 8 Washer
GB/T859/8 Washer..
GB / T882 / B12x38 Finger Pin
GB/T882/B12x38 Pin Shaft..
GB / T894. 1A8 O-ring
GB/T894.1A8 Retainer ring..
GB / T897 / GM12-M12x35 Rack
GB/T897/GM12-M12x35 Stud..
GB / T899 / AGM12-M12x35 Bolt
GB/T899/AGM12-M12x35 Stud..
GB / T899 / AGM12-M12x40 Rack
GB/T899/AGM12-M12x40 Stud..
GB / T899 / AGM16-M16x235 Bolt
GB/T899/AGM16-M16x235 Stud..
GB / T899 / AGM16-M16x260 Bolt
GB/T899/AGM16-M16x260 Stud..
GB / T899/BGM10-M10x30 Pin
GB/T899/BGM10-M10x30 Stud..
GB / T91/3x15 Pin
GB/T91/3x15 Pin..
Showing 205 to 216 of 287 (24 Pages)

HENGTAN MACHINERY (BW / BWF) model BW-160/10