BORG Pumps GMBH company is the official distributor of Hengtan Machinery in the Russian Federation.

HENGTAN BWF-240 (BWF-240A) single-acting three-piston drilling pump is designed for pumping drilling mud and water, used in horizontal directional drilling (HDD), construction of water wells and mine drainage systems. The maximum pump capacity is 240 l / min and the maximum pressure is 25 bar. The pump cylinders are made of high-quality steel using hard chrome plating technology, it is possible to install stainless steel cylinders with a ceramic insert, which significantly increases reliability and increases the service interval. The mud pump pistons are made of high-strength rubber. The pump is equipped with ball valves and stainless steel seats. The pump cylinder diameter is 75 mm, it is possible to install cylinders of other diameters to change the pump pressure and fluid supply parameters.


F240A-02(Z)-00 Pump body
F240A-02(Z)-00 Pump body..
F240A-02-02 Big gear
F240A-02-02 Big gear..
F240A-02-03 Pinion
F240A-02-03 Pinion..
F240A-07-00 Discharge pipe
F240A-07-00 Discharge pipe..
F240A-08-00 Suction joint
F240A-08-00 Suction joint..
GB / T308 / 14.3-G4 Steel Ball
GB/T308/14.3-G40 Steel ball..
GB / T308 / 35-G40 Steel Ball
GB/T308/35-G40 Steel ball..
GB/T10708.1/Y32x42x8 Y seal ring
GB/T10708.1/Y32x42x8 Y seal ring..
GB/T10708.3/FA32x40x5 Dust seal ring
GB/T10708.3/FA32x40x5 Dust seal ring..
GB/T1096/10x50 Key
GB/T1096/10x50 Key..
GB/T1096/5x16 Key
GB/T1096/5x16 Key..
GB/T117/6x30 Pin
GB/T117/6x30 Pin..
Showing 121 to 132 of 196 (17 Pages)

HENGTAN MACHINERY (BW / BWF) model BWF-240